Flush Disc Coupons
Flush disc coupons of various sizes and models for 2 “system access fittings, which are commonly used for oil and gas, upstream and downstream, chemical companies, etc.
Flush Disc Coupons: Generally used in applications where the coupon cannot extend into the pipe to interfere with the flow or pigging operations. A circular coupon with a diameter a 1.25″, a thickness of 0.125″ (3.18 x 0.32 cm), and one mounting hole ID 0.312″ (0.792 cm.).
Multiple Disc Coupon: Monitoring is available for pipes with diameters of 6″ or more. This pipeline corrosion protection method offers the following advantages: inherent orientation parallel to flow, greater surface area at a specific level, greater quantity and variety of coupon materials, easier monitoring in stratified or multi-phase flow, and corrosion coupons location in recess area of access fitting for monitoring in gas pockets or stagnant areas.
The hole is countersunk, and uses a flathead, stainless steel screw, insulating washer and insulating disc for mounting.
The exposed surface area is 2.5 sq. in. (16.1 sq. cm.)
|Material||AISI 1018, ASTM A106 gr B, to order|
|Weight||Below 50 gram union depend on the model, details will be listed on the envelope|
|Standard||NACE RP-0775 and ASTM G-1|
|Dimension||OD:1.25″, Thickness 1/8″|
|Other Type||Multiple disc coupon
Multiple Disc Coupon Monitoring is available for pipes with diameters of 6″ or more
Flush Disc Coupons Two-Inch System
Flush Disc Coupon Two-Inch System
AISI 1018, ASTM A106 gr B, to order
Below 50 gram union depend on the model, details will be listed on the envelope
NACE RP-0775 and ASTM G-1
OD:1.25″, Thickness 1/8″
Multiple disc coupon