2″ access fitting corrosion
An access fitting with a solid or hollow plug in it carry the internal corrosion monitoring or injection device. The access fitting is permanently attached to the vessel or pipe, and the service valve and retriever are used to insert or remove the various probes, corrosion coupons or injection equipment.
This corrosion monitoring access system is the worldwide standard for high pressure access fitting systems and tools for “access under pressure” up to 6,000 psi (41 Mpa) and 450° F (232° C).
|Material||A105 CS, Other|
|Temperature||Standard Temperature Rating with Viton/Teflon Seals:
From -15° F (-26° C) Up To +400° F (+204°C)
|Type||Fitting Flarweld, Sockedweld, Buttweld, NPT, Flance|
|ACCESS FITTING ASSEMBLIES
A105 CS, Other
Standard Temperature Rating with Viton/Teflon Seals:
Fitting Flarweld, Sockedweld, Buttweld, NPT