2″ access fitting corrosion

An access fitting with a solid or hollow plug in it carry the internal corrosion monitoring or injection device. The access fitting is permanently attached to the vessel or pipe, and the service valve and retriever are used to insert or remove the various probes, corrosion coupons or injection equipment.
This corrosion monitoring access system is the worldwide standard for high pressure access fitting systems and tools for “access under pressure” up to 6,000 psi (41 Mpa) and 450° F (232° C).

High Pressure Access System includes access fittings for corrosion coupons or electronic corrosion monitoring, chemical injection and sampling as well as retrievers, service valves and a full range of tools for servicing the fittings. An access fitting with a solid or hollow plug in it carry the internal corrosion monitoring or injection device.

The A/F is permanently attached to the vessel or pipe, and the service valve and retriever are used to insert or remove the various probes, corrosion coupons or injection equipment.

The A/F Assembly permits safe, easy insertion and retrieval of corrosion and erosion monitoring systems as well as preventive maintenance devices for injecting inhibitors or for sampling, etc. while under full operating pressure.

also offers a variety of options for the A/F Assembly, including Tee-type for chemical injection, Internal ACME threaded for bottom-of-the-line positions where solids are present. The A/F consists of the body and a hollow or solid plug assembly. A protective cover is also available and recommended for all applications.

Specifications:

ACCESS FITTING ASSEMBLIES CATALOG