Access fitting monitoring for corrosion

Why must use Access Fitting for corrosion monitoring

Whenever found in combination  with a Retriever and Service Valve, the Access Fitting Assembly permits safe, Easy insertion and retrieval of corrosion and erosion monitoring systems along with preventive maintenance products for inserting inhibitors and sometimes even for sampling, etc.

while under complete operating stress. The Flarweld kind Access Fitting is made  to be welded straight  to theVessel or pipe. The fitting includes a radius to match The curvature of the vessel or pipe, having  a optimum 1/16” weld space. In addition incorporates a body that is thick Provide branch that is sufficient area to assistfortify  the weld joint. It is  the type that is many that is popular of mounting configuration.

Access Fitting for corrosion monitoring

Access Fitting Mounting:

  • Mounting — Flarweld with Integral Branch
  • Reinforcement per ASME B31.3
  • Direct welding to pipe or vessel, most economical, most compact

Temperature and Pressure Ratings:

Standard Temperature Rating with Viton/Teflon Seals:
— From -15° F (-26° C) Up To +400° F (+204° C)
Available Temperature Rating with Optional Seals:
— From -70° F (-56° C) Up To +450° F (+232°C)
Pressure Rating — 6000 PSI / 41.3 MPa Working


Meets NACE MR0175 and MR0103

Available with ACME Threaded and Severe Service, Internal Configurations, Optional NPT, Flanged, Socketweld, and Buttweld Tee Connection

Access Fitting

Leave a Reply

Your email address will not be published. Required fields are marked *